excellence, through every fber. honeywell sensing and control (s&c) offers fber optic sensors manufactured with sercos (serial real-time communication system) transmitters and receivers, duplexers, even liquid level sensors. each fully customizable, and designed to meet and exceed harsh environmental demands. sercos transmitters and receivers: best for low and medium speed short-haul fber optic links in cost-sensitive, rugged environments from potential industrial applications to backbone in building networks. features duplex modules hod2236-111/bba and hod4090-111/bba series. features: full duplex over single fber ? dc to 160 mhz link bandwidth ? link budgets of 2 km [1.24 miles] or greater ? 40 db isolation ? other transmitter/ receiver confgurations, housing, and connector options available benefts: pair of single fber duplex modules allows full duplex communication over a single fber link. two devices per module, coupled to a single fber via integral lenses and a 3 db wavelength differentiating mirror, allow two corresponding duplex modules to communicate in opposing directions simultaneously and independently of each other. used to multiplex two signals to a single fber or where a dual fber solution is neither possible nor economical. fiber optic technology provides minimum data corruption and emi/rfi immunity. used in potential applications requiring fber-optic medium but looking to reduce cabling fiber optics and liquid l evel sensors line guide continued on page 4 costs such as cctv/video surveillance, data communications, test equipment, and remote sensing and control. sercos t ra nsmitters hfe7000-210 series. features: designed to work with honeywells high-speed receivers hfd7000-xxx and hfd7500-xxx ? super bright led ? enhanced power output ? speed ? enhanced reliability ? meets sercos (serial real-time communication system) specifcations benefts: 650 nm wavelength provides low attenuation; integrated lens provides maximum coupling into plastic fbers. fiber optic led component mounted in polymide plastic fber-reinforced housing for mechanical stability. plastic sma housing delivers cost-effective module easily mounted on pcb. high-speed optical transmitter converts electrical signals into optical signals to meet data transmission requirements for factory and offce automation applications. potential applications include harsh industrial environments, building networks, machine tool/robot control, automated industrial production lines, point-to-point links requiring a speed up to 50 mb/s, and lower cost plastic fber networks. hfe7020-210 series. features: designed to work with honeywells high speed receiver hfe7520-2120 ? enhanced power output ? speed ? enhanced reliability ? meets sercos (serial real-time communication system) specifcations benefts: 650 nm wavelength provides low attenuation in plastic fbers. fiberoptic led component mounted in polymide plastic fber-reinforced housing for mechanical stability. plastic sma housing delivers cost-effective module easily mounted on pcb. high-speed optical transmitter converts electrical signals into optical signals to meet data transmission requirements for factory and offce automation applications. potential duplexers: honeywell s&cs single fber duplex modules are capable of either bi-directional data transmission or multiplexing two different wavelengths over a single optical fber. liquid l evel sensors: using the principle of total internal refection, weve created a fast, often reliable, cost-effective solid- state sensor family.
hod2236-111/ bba hod4090-111/ bba device location port 1 port 2 port 1 port 2 device type transmit 1300 nm multimode laser receive 850 nm pin diode receive 1300 nm pin diode transmit 850 nm vcsel rise/fall time <3 ns <3 ns <3 ns <3 ns fiber coupled power range 40 mw to 100 mw C C 200 mw to 400 mw slope effciency 0.35 mw/ma typ. C C 0.2 mw/ma typ. forward voltage 1.2 v typ. C C 1.8 v typ. threshold current 12 ma typ. C C 3.6 ma typ. spectral bandwidth 2 nm typ. C C 0.85 nm max. response time 0.5 ns max. 3 ns max. 1 ns max. 300 ps max. flux responsivity C 0.3 a/w typ. 0.50 a/w typ. C dark current C 0.05 na typ. 2.0 na typ. C reverse voltage C 50 v max. 20 v max. C capacitance C 1.5 pf typ. 1.5 pf typ. C optical budget when used with corresponding duplexer <10 db <10 db <10 db <10 db connector st low profle st low profle st low profle st low profle operating temperature range 0 c to 70 c [32 f to 158 f] 0 c to 70 c [32 f to 158 f] 0 c to 70 c [32 f to 158 f] 0 c to 70 c [32 f to 158 f] mounting pcb pcb pcb pcb custom solutions. rugged performance. honeywell sc offers a wide variety of fber optic and liquid level sensors. sercos transmitters and receivers: meeting all ing sma fber dip packaging against rfi. duplexers: for potential customer-specifc applications requiring a fber-optic medium and reduced cabling costs including video surveillance, data communications, and test equipment. the modules fall into three basic confgura - tions: 1. wdm (wavelength division multiplexing) delivers active coupler behaves as a wdm module, but uses the both directions. 3. wave divi liquid l evel sensors: an fiber optics and liquid l evel sensors line guide duplex modules
www.honeywell.com/sensing 3 hfe7000-210 series hfe7020-210 series housing style/material plastic sm fber dp plastic sm fber dp data rate mbps mbps fiber coupled output power dm min at m dm typ at m power dissipation m m forward current m m operating temperature range c to c f to f c to c f to f lln series ll e series housing material stainless steel polysulphone nickelplated brass stainless steel supply voltage range dc to dc dc to dc supply current m max m max output sinking sinking termination pin umberg/rad harrisontype connector lead wires seal washer uorocarbon nitrile rubber vamac rubber operating temperature range c to c f to f c to c f to f inclusive hfd7520-2xx series hfd7510-2 xx series hfd7000-2 xx series housing style/material plastic sm fber dp plastic sm fber dp plastic sm fber dp with plastic or metal barrel minimum detectable signal level dm at nm dm at nm dm at nm data rate mbps max mbps max mbps max current consumption m m operation mode m supply voltage range to to to operating temperature range c to c f to f c to c f to f c to c f to f sercos transmitters liquid l evel sensors sercos receivers
applications include harsh industrial environments, building networks, machine tool/robot control, automated industrial production lines, point-to-point links requiring a speed up to 50 mb/s, and lower cost plastic fber networks. sercos receivers hfd7520-2xx series. features: designed to work with honeywells high-speed 650 nm led hfe 7020-210 ? often accurate, high-speed data transmission in diffcult environments ? pecl voltage conversion output ? wide dynamic range ? enhanced reliability ? meets sercos (serial real-time communication system) specifcations benefts: monolithic chip design provides enhanced resistance to external noise and enhanced reliability. plastic sma housing provides cost-effective module easily mounted on pcb. monolithic 156 mbps receiver designed for plastic optical fber data communication in factory automation, offce machines, home automation, and lans, especially those subject to high electromagnetic noise. potential applications include harsh industrial environments, building networks, machine tool/robot control, automated industrial production lines, point-to-point links requiring a speed up to 50 mb/s, and lower cost plastic fber networks. hfd7510-2 xx series. features: designed to work with honeywells high-speed 650 nm led hfe 7010-210 ? standby mode for low power dissipation ? often accurate, high-speed data transmission in diffcult environments ? ttl output ? wide dynamic range ? enhanced reliability ? meets sercos (serial real-time communication system) specifcations benefts: monolithic chip design provides enhanced resistance to external noise and enhanced reliability. standby mode automatically switches to low power dissipation mode when no light is input and switches back to normal operation mode when light is input, from the optical fber. current consumption in standby mode is approximately 1/400 th that of normal current consumption. plastic sma housing provides cost-effective module easily mounted on pcb. monolithic 50 mbps receiver designed for plastic optical fber data communications in factory automation, offce machines, home automation, and lans, especially those subject to high electromagnetic noise. potential applications include harsh industrial environments, building networks, machine tool/robot control, automated industrial production lines, point-to-point links requiring a speed up to 50 mb/s, and lower cost plastic fber networks. hfd7000-2 xx series. features: designed to work with honeywells high-speed 660 nm led hfe 7000 ? enhanced mechanical stability ? enhanced rfi/emi/esd shielding ? often accurate, high-speed data transmission in diffcult environments ? ttl output ? low cost plastic version available ? meets sercos (serial real-time communication system) specifcations benefts: monolithic cmos chip consists of large area photodiode, preamplifer with controlled gain, post amplifer, comparator, and ttl output stage. integrated voltage regulator for easy use in many applications. on-chip controlled gain provides a wide dynamic range and low pulse width distortion. metal receptacle provides greater mechanical stability and better immunity against rfi than plastic because electrical ground is separated from the receptacles ground. high-speed optical receiver designed for data transmission in industrial lan applications. potential applications include harsh industrial environments, building networks, machine tool/robot control, automated industrial production lines, point-to-point links requiring a speed up to 50 mb/s, and lower cost plastic fber networks. liq uid level sensors lln series. features: solid-state reliability, no moving parts ? 200 ma sinking output is ttl compatible ? sinking output ? fast response ? polysulphone sensor dome ? stainless steel, high pressure housing ? ip67 ? reverse polarity and overvoltage protection benefts: principle of total internal refection creates fast, reliable, cost- effective solid-state sensor. optoschmitt trigger provides digital output indicating presence or absence of liquid. stainless- steel housing for extended life and easy cleaning. quick-connect, industry- standard cable assembly for easy installation. meets ip67 for use in harsh industrial environments with extremes in temperature, pressure, vibration, and shock such as food and beverage processing, machine tools, industrial compressors, and vending machines. polysulphone sensor dome often suitable for potential hygiene applications. ll e series. features: miniature size ? solid-state reliability, no moving parts ? sinking output ? microprocessor compatible ? very large choice of sensing media ? cost effective ? fast response ? polysulphone housing ? reverse polarity and overvoltage protection ? short circuit and transient protection benefts: photo-transistor trigger provides digital output indicating presence or absence of liquid. internal or external mounting options for application fexibility. miniature size for potential use in home appliances, food and beverage processing, compressors, and vending machines. polysulphone housing often suitable for potential hygiene applications. 4 www.honeywell.com/sensing
sensing and control automation and control solutions honeywell 1985 douglas drive north golden valley, mn 55422 usa +1-815-235-6847 www.honeywell.com/sensing 006729-1-en il50 glo june 2008 copyright ? 2008 honeywell international inc. all rights reserved. war ning personal in jury ? do not use these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. war ning misuse of documen tation ? the information presented in this catalogue is for reference only. do not use this document as product installation information. ? complete installation, operation and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury. warranty. honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. honeywells standard product warranty applies unless agreed to otherwise by honeywell in writing; please refer to your order acknowledgement or consult your local sales offce for specifc warranty details. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace, at its option, without charge those items it fnds defective. the foregoing is buyers sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and ftness for a particular purpose. i n no event shall honeywell be liable for consequential, special, or indirect damages. war ning personal in jury ? do not use these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. war ning misuse of documen tation ? the information presented in this catalogue is for reference only. do not use this document as product installation information. ? complete installation, operation and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury. while we provide application assistance personally, through our literature and the honeywell web site, it is up to the customer to determine the suitability of the product in the application. specifcations may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. for more information about sensing and control products, visit www.honeywell. com/sensing or call +1-815-235-6847 email inquiries to info.sc@honeywell.com
|
